Description
Celebrate your faith with the God Is Good rhinestone design. Choose a DIY transfer to apply to your own garment or a black T-shirt with the rhinestones already applied.
- DIY transfer only: $12.99. No shirt included. Select “DIY Transfer Only” in Sizes.
- Finished black shirt, S–L: $18.99.
- Finished black shirt, XL–2XL: $23.99.
- Finished black shirt, 3XL–5XL: $27.99.
Rhinestone design and shirt mockup are shown in the product images. DIY transfers are physical products, not digital downloads.
Care: Wash finished garments inside out in cold water on a gentle cycle and hang dry. Do not bleach or iron directly over the rhinestones.
DIY Rhinestone Transfer Application
For the DIY transfer-only option. A heat press is recommended. Check that your garment can tolerate the application temperature.
Prepare the transfer
Inspect the stones and use tweezers to correct any that have shifted. Gently separate the white backing from the clear carrier, keeping the stones on the clear sheet. Position stones against the fabric with the clear carrier facing up. Lift to reposition; do not drag the sheet.
Heat press method
- Set the press to 330°F (about 166°C), 12–15 seconds, medium pressure.
- Place the garment flat on the press and position the transfer.
- Cover the design with a Teflon pressing sheet and press.
- Carefully peel the clear carrier while hot, within 5–10 seconds. If stones lift, lay the carrier back down and press again for 4–6 seconds.
Household iron method
Use the cotton setting, approximately 340°F (171°C). Position the transfer as above. Hold the iron still with steady pressure for 15 seconds per section. Lift and move to the next section until the entire design is pressed; do not slide the iron. Peel the carrier slowly. If stones lift, replace the carrier and press again.
Garment care
Wash inside out in cold water on a delicate cycle and hang dry.
















Reviews
There are no reviews yet.