Description
2″ Bold Number (Total 21 numbers sheet) Rhinestone – DIY Number Pack
Includes one complete physical rhinestone number sheet as pictured. Use the individual number motifs for your own layouts.
$16.99 per pack. Pack only; no T-shirt included.
DIY Rhinestone Transfer Application
For this DIY number pack. A heat press is recommended. Check that your garment can tolerate the application temperature.
Prepare the transfer
Inspect the stones and use tweezers to correct any that have shifted. Gently separate the white backing from the clear carrier, keeping the stones on the clear sheet. Position stones against the fabric with the clear carrier facing up. Lift to reposition; do not drag the sheet.
Heat press method
- Set the press to 330°F (about 166°C), 12–15 seconds, medium pressure.
- Place the garment flat on the press and position the transfer.
- Cover the design with a Teflon pressing sheet and press.
- Carefully peel the clear carrier while hot, within 5–10 seconds. If stones lift, lay the carrier back down and press again for 4–6 seconds.
Household iron method
Use the cotton setting, approximately 340°F (171°C). Position the transfer as above. Hold the iron still with steady pressure for 15 seconds per section. Lift and move to the next section until the entire design is pressed; do not slide the iron. Peel the carrier slowly. If stones lift, replace the carrier and press again.
Garment care
Wash inside out in cold water on a delicate cycle and hang dry.















Reviews
There are no reviews yet.